Having working plumbing is a luxury – there is no doubt about that. In another era, people were forced to use outhouses and outdoor showers with no heat. Today, we have indoor plumbing and seamless waste removal. Not only that, but we have scalding hot water on demand. This is a huge leap. However, our plumbing systems are not impervious. Anything can happen. Pipes can rust and leak, they can freeze, and bursts and clogs can back up toilets and kitchen sinks. This is exactly why it can be helpful to have some advice when it comes to making repairs here and there. Here are five helpful DIY plumbing tips for your home or office.
- Don’t flush cooking grease and oils down the drain. It is important that you avoid plumbing issues wherever you can. One of the best ways to prevent a major headache is to not flush cooking grease and oils down the drain. That bacon you just cooked? You want to wait for all the grease to cool and then toss it out in the trash. You don’t want it to congeal on the side of sink pipes and cause a backup.
- Keep a plunger on standby for sink clogs and toilet clogs. When a clog does happen, it can help to have a few plungers on standby. You may want to keep one plunger for sink clogs and another for toilet clogs. This is especially important when it comes to not getting toilet germs around your kitchen sink. With a few pushes of a plunger, you should be able to dislodge most clogs.
- Hire a plumber for the big jobs that you can’t take on. If the clog is particularly severe, or if the job is too big and complicated, you probably want to leave it in the hands of a professional. This is why hiring a plumbing service, like Northeast Plumbing, may be so important. The last thing you want is to cause any damages. Also, you don’t want to turn small problems into big ones. A plumber will have all the know-how and tools to take on any job.
- Find out where all the main water shut off valves are. When you do work on your pipes – whether in your office or home – you want to know where the main shut off valves are. There is usually a main valve that will shut off water for the entire property. It is important to flip this valve when there is a major flood. If you are working on individual sinks, you want to open the cabinet and find the shut off valves.
- Check the aerator if you are having problems with water pressure. Most sinks have aerators. They are placed onto faucets to ensure that water is evenly distributed. Over time, though, these aerators can start to get filled with gunk and grime. If you turn on a faucet and the water seems weaker, there is a good chance that the aerator is the culprit. In the end, changing aerators is easy and affordable.